What Does the Picatinny CLIK Drone Payload Standard Give a Supplier?
The Picatinny CLIK drone payload standard is a free, public Army design standard for attaching lethal payloads to unmanned aircraft, including small drones. Its announcements name no funding. The revenue question is a cost-of-entry decision for payload, release-mechanism, fuze, power, and interface suppliers. You can conform now to a standard the Army said in 2025 it intends to carry into acquisition in 2027. Or you can wait for a solicitation that may never cite it. If the Army’s acquisition office writes CLIK compliance into a solicitation, early conformers arrive bidding-ready and late ones do not. If it does not, the conformance work is a sunk cost.
CLIK stands for Common Lethality Integration Kit. The Army’s Combat Capabilities Development Command (DEVCOM) Armaments Center at Picatinny Arsenal, New Jersey, owns it. The standard defines how a payload mounts, draws power, exchanges data, and receives safety-critical commands on a drone. One payload can then fit many drones. Version 2.1, an interim release dated Sept. 17, 2025, is approved for public release. For direct work, the Army points companies to a cooperative research and development agreement (CRADA) with the National Armaments Consortium (NAC).
| Field | Answer |
|---|---|
| Signal | The Army’s Nov. 5, 2026 announcement says more than 500 industry partners attended a September webinar on pairing conventional payloads with drones through the CLIK standard |
| BD implication | Building to the standard is an option on a possible future buy; the stated 2027 transition has no published dollar figure, quantity, vehicle, or current owner |
| Customer | U.S. Army units fielding armed small drones |
| Buyer | PM Close Combat Systems and the Capability Program Executive for Ammunition & Energetics are the probable buying offices; the Army has not named the 2027 transition owner |
| Funding | Not identified; the standard and the Army’s CLIK announcements name no dollar figure, request, or obligation |
| Vehicle / path | NAC-Armaments Center CRADA for collaboration; purchase vehicle not identified |
| Incumbents / ecosystem | The Armaments Center’s own HEX-ESAD and PLUS designs; CRADA partners are unnamed |
| Access strategy | Join the NAC; conform a product to the public standard |
| Timing | Transition stated for 2027 in an August 2025 article; no later date published |
| Confidence | Medium |
| Pursuit posture | SHAPE |
| Upgrade triggers | A solicitation or other-transaction call that cites CLIK compliance; a named 2027 transition owner; a CLIK budget line; a named prime or purchase vehicle (moves hardware suppliers to TEAM) |
| Downgrade triggers | A joint standard from the Defense Department’s new unmanned systems office that replaces CLIK; a 2027 slip with no stated owner |
- The standard is public, approved for unlimited distribution (Distribution Statement A).
- The Army’s CLIK announcements carry no dollar figure, quantity, or funding line.
- The procurement records are sources-sought notices, which are market research, not solicitations. The most recent listed a March 2, 2026 response date.
What Is in the Picatinny CLIK Standard, and How Does a Company Get Involved?
The standard is a technical requirements document. It says payloads are often integrated in ways that do not transfer between platforms. Its goal is to avoid a separate certification for every payload-and-drone combination. It builds on the older Modular Payload Design Standard. The companion small Universal Payload Interface (sUPI) covers low-capacity platforms and is slated to join CLIK in a future addendum. Conformance is voluntary today: the Army’s CLIK announcements cite no clause or contract requiring it. Do not assume conformance waives any review: webinar attendees asked mostly about harmonizing safety review criteria. The standard covers rail mounting, connectors, power, Ethernet and serial links, safety discretes, and a message protocol. Any supplier can read it.
| Route | What it gives a company | What it does not give |
|---|---|---|
| Public design standard | Requirements to build against | A purchase commitment or a certification |
| NAC-Armaments Center CRADA | Collaboration with the Armaments Center, which urged companies at the webinar to join the NAC | Payment; a CRADA is cooperative research, not a purchase |
| Sources-sought notice (listed response date passed) | Visibility to the Army’s market research on CLIK-compliant interfaces | A solicitation or an award; the listed response date was March 2, 2026 |
| Planned 2027 transition | The stated point where acquisition could begin | A named owner, a confirmed date, or funding |
The Armaments Center’s own safe-and-arm device, HEX-ESAD, recognizes the installed warhead and adjusts its firing parameters.
Why Is a Free Picatinny CLIK Standard Not a Funded Army Buy?
The Picatinny CLIK drone payload standard decides who can compete after the Army has money to spend. It does not create that money. The Army’s CLIK announcements and the standard itself name no dollar figure, quantity, or funding line. Neither the NAC route nor the sources-sought notice commits the Army to buy anything. No acquisition vehicle for buying CLIK payloads is named.
The record shows three limits:
- The CRADA obligates no money. It gives access to the Armaments Center and its engineers, and nothing more.
- The notice was market research. A listing shows Army Contracting Command-New Jersey seeking payload interface solutions compliant with CLIK or sUPI, with a March 2, 2026 response date. A sources-sought notice tells the Army who exists. It is not a solicitation.
- The standard is an interim release. The webinar’s open forum drew 72 questions, mostly about harmonizing safety review criteria and the timeframe for selecting a standardized interface. Those questions suggest industry does not yet treat the interface as final.
No award tied to CLIK by name is on the record. A CRADA obligates no funds. A sources-sought notice produces no award. Neither would show one. Prototype work through a consortium agreement, a research award, or a platform maker’s subcontract would not necessarily carry the CLIK name. A contract search therefore cannot settle whether money is already moving.
A BD lead should treat building to CLIK as an option, not market entry. It buys the right to compete if a solicitation cites the standard. Price it against your own engineering cost.
Who Owns the 2027 CLIK Transition After the Army’s Reorganization?
The Army has not named a current owner for the 2027 transition. An August 2025 Army article said the Joint Program Executive Office for Armaments and Ammunition (JPEO A&A) intends to transition CLIK in 2027. A Feb. 2, 2026 Army article reported that JPEO A&A realigned into the Capability Program Executive for Ammunition & Energetics (CPE A&E). CPE A&E sits under a new Portfolio Acquisition Executive for Agile Sustainment and Ammunition activated Jan. 20, 2026. No later Army text restates the 2027 date.
Three offices matter:
- CPE A&E keeps life-cycle acquisition management of conventional ammunition at Picatinny Arsenal.
- PM Close Combat Systems at Picatinny Arsenal deploys drone payload efforts to the Army. The Armaments Center’s August 2026 announcement says its investments will be handed to the Army’s acquisition team. It is the likeliest receiver, but the Army has not named it transition owner.
- DRPM UxS, the Direct Reporting Portfolio Manager for Unmanned Systems, is new and reports directly to the Deputy Secretary of War. The Army describes it as established in July 2026 to enforce joint technical standards, interoperability baselines, and Modular Open Systems Architecture (MOSA) requirements. CLIK is a MOSA standard.
I see that last office as the main risk to a 2027 CLIK transition. A joint DoD standard from DRPM UxS could adopt CLIK, narrow it, or replace it. No Army document says which. Until a transition owner and date are published, treat 2027 as an intention, not a schedule.
Competitive Landscape: Who Is Already Positioned Around CLIK
The Army has not published the CRADA participant list or the sources-sought respondents. The positioned field is only partly visible. The Army has named three kinds of player. Each competes or cooperates differently.
- The Armaments Center itself. Its HEX-ESAD fuze and its Picatinny Lethal Unmanned Systems (PLUS) warhead suite are the Army’s own CLIK-compliant designs. The Army calls its HEX design the gold standard for CLIK-compliant lethality integration. A supplier competing on safe-and-arm or warheads competes with the reference design.
- Drone platform makers. The Army’s photo caption from Fort Irwin names the “PDW C-100 Defense” drone carrying a CLIK payload. A July 2025 Army article says the Armaments Center holds CRADAs with UAS platform manufacturers and payload developers, without naming them.
- Interface and power makers. The standard specifies connectors, power, and message formats, which opens room for suppliers of interface modules. The Army has not named a company with a CLIK-compliant interface product.
The Army’s long-range drone interceptor effort at its DEVCOM Aviation & Missile Center is a separate acquisition environment. Do not read an interceptor award as a CLIK signal.
What Should Payload, Fuze, and Interface Suppliers Do Before 2027?
I classify this as SHAPE. The likely buying offices are identifiable. The standard is an interim release revised from comments and working group meetings. The Armaments Center said in August 2025 it was seeking industry partners for interfaces, communication protocols, and safety features. No solicitation exists to pursue. No prime or purchase vehicle exists to team around yet.
A conformance decision runs in a fixed order:
- Map your product to the standard’s mounting, connector, power, data, and safety sections, and list each gap.
- Estimate the engineering cost to close each gap.
- Ask the NAC what the CRADA covers before you pay for changes.
- Ask the NAC and the Armaments Center how industry comments on version 2.1 are taken, then submit yours on safety review criteria. Ask PM Close Combat Systems for the transition timeline.
- Set a go or no-go trigger, such as a solicitation citing CLIK, and a budget cap until it arrives.
- Founder or capture lead at a payload or warhead maker: check your small business size status against NAICS 336411, the code on the listed sources-sought notice. Then compare your attachment and safety architecture to the public standard.
- Fuze and safe-and-arm DIB sub: compare your design to the HEX-ESAD approach the Army describes before you quote.
- Power or communications interface maker: map your module to the standard’s connector, Ethernet, serial, and safety-discrete requirements.
- Drone platform maker: check which CLIK-compliant payloads your airframe can lift, balance, and power.
- New entrant, including a nontraditional entrant under the statutory test (no defense contract or subcontract subject to full cost-accounting-standards coverage in the past year): join the NAC and ask about the CRADA before spending on conformance.
Watch for a solicitation or other transaction opportunity that cites CLIK compliance, a named 2027 transition owner, or a CLIK budget line. Any of the three moves this toward an active pursuit. A DRPM UxS standard that replaces CLIK, or a 2027 slip with no owner, moves it back to watching.
FAQ
Is Picatinny CLIK a funded Army program?
The Army’s CLIK announcements name no funding. No dollar figure, quantity, or budget line appears in them or in the standard. The Army has not called CLIK a program of record.
Is the Picatinny CLIK standard free to use?
Yes. The design standard is approved for public release with unlimited distribution. The Army says it is available to industry partners building weaponized drone technology.
What does the NAC-Armaments Center CRADA give a company?
It gives collaboration with the Armaments Center. The Army urged companies to join the NAC and partner through the CRADA. It does not pay the company or commit the Army to a purchase.
Is there an open CLIK solicitation?
No solicitation tied to CLIK is on the record. A sources-sought notice listed for CLIK or sUPI-compliant interfaces carried a March 2, 2026 response date and asked for capabilities, not bids.
How does CLIK relate to sUPI and the new DRPM UxS standards?
The standard calls sUPI the alternative for platforms with low payload capacity. It says sUPI components will join CLIK in a future addendum. DRPM UxS enforces joint MOSA standards, and CLIK follows MOSA. No Army document says whether DRPM UxS will adopt, narrow, or replace CLIK.

